Kohler Command Pro CV980 Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
5.13
Section 5
Fuel System and Governor
5
śǯȱ ȱȱȱ¡ȱǻ¢ȬǼȱȱȱȱ
ȱȱĞȱȱȱȱȱȱ
lever from the carburetor housing. Save the
bushing to use as a driver for installing the new
bushing. Discard the old lever.
ȱ Ŝǯȱ ȱȱǯǯȱȱȱȱĞȱȱȱ
required.
7. Insert the new bushing through the new choke
lever from the outside, and start the bushing in
ȱȱĞȱǯȱȱȱȱȱȱ
the protruding boss on the carburetor housing is
between the two stops formed in the choke lever.
ȱȱśȬřŖǯ
Figure 5-30. Assembling Choke Lever.
8. Turn the old bushing upside down and use it
as a driver to carefully press or tap the new
ȱȱȱȱ¢ȱȱȱĴǯȱ
Check that the choke lever pivots freely without
ȱȱǯȱȱȱśȬřŗǯ
Figure 5-31. Installing Bushing.
9. Install the new return spring onto the new choke
Ğǰȱȱȱȱȱȱȱȱȱȱ
ȱȱȃȄȱȱȱȱȱȱȱĞǯȱ
ȱȱśȬřŘǯ
DZȱ ȱȱȱ¢ȱȱȱȱȱ
the following step.
Figure 5-32. Choke Shaft and Spring Details.
ȱȱŗŖǯȱ ȱȱȱĞȱȱȱȱȱ
ǯȱȱǻǼȱȱĞȱƝȱȱ
counterclockwise with the inner leg of the spring,
against the formed stop within the choke lever as
¢ȱǯȱȱȱśȬŘşȱȱśȬřřǯȱ
The outer leg of the spring must still be behind
ȱȱȃȄȱȱȱȱĞǯ
Figure 5-33. Installing Choke Assembly
Components.
11. Place a drop of Loctite
®
on the threads of each
new screw. Position and install the new choke
ȱȱȱĚȱȱȱȱȱĞǯȱȱȱ
two screws. Close the choke and check the plate
alignment within the carburetor throat, then
tighten the screws securely. Do not overtighten.
ȱȱśȬřŚǯ
Stops
Boss
Choke Shaft
Spring Ends
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 137 138

Comentarios a estos manuales

Sin comentarios