Kohler K-1734-NA Guía de instalación descargar pdf (Pagina 4)

1. Determine the Layout

WARNING: Risk of property damage. Allow a minimum of 12″ (30.5 cm) of air space around the

steam generator at all times. This provides an area for the heat generated by the unit to dissipate.

NOTICE: The steam generator will perform best when installed as close as possible to the steam head. The

unit should be installed within 25’ (7.62 m) of the steam head.

NOTICE: For optimum performance install the steam generator below the level of the steam head.

NOTE: When possible, use 45 degree elbows. Performance will be increased when 45 degree elbows are

used.

NOTE: The ″Recommended Layout Options″ sections include information speciﬁc to Kohler bath and

shower products. Refer to those sections for additional layout information.

Determine the location of the steam generator. Allow for a 12″ (30.5 cm) air gap on all sides of the

generator. Allow for a drain pan.

Choose a drain pan appropriate for your installation. The drain pan is not supplied.

Drain Pan

Tee

Steam Head

Control Cable

Input

Recommended In-Line

Water Filter

Water

Inlet

Pressure Relief Valve

Shut-Off

Valve

Install copper union as close

as possible to steam generator.

Install copper union

in water feed line.

Field Service Box

Water Feed to Steam Generator

1060226-2-F 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 43 44

Sin comentarios

Kohler K-1734-NA Guía de instalación Pagina 4