Kohler K-1108-RA-47 Guía de instalación descargar pdf (Pagina 13)

5. Complete the Installation

Carefully remove the protective tape from the bath rim.

Cover the framing with water-resistant wall material.

Apply a bead of silicone sealant in the groove between the edge of the bath deck

and the water-resistant wall material.

Tape and mud the water-resistant wall material.

NOTICE: When selecting ﬁnished wall material, do not exceed 1-1/2″ (3.8 cm)

thickness. This will ensure the ﬁnished wall material will overlap the integral apron

columns.

Install the ﬁnished wall material 1/4″ (6 mm) above the bath deck. This will create

a groove to apply the silicone sealant.

Apply a bead of silicone sealant in the groove between the ﬁnished wall and the

rim.

NOTICE: When selecting ﬁnished ﬂoor material, do not exceed 2″ (5.1 cm) thickness.

This will ensure the integral apron will be ﬂush with the ﬁnished ﬂoor.

Install the ﬁnished ﬂoor material.

2x4 Studding

Montant 2x4

Postes de 2x4

Water-Resistant Wall

Material

Matériau

hydrorésistant du mur

Material de pared

resistente al agua

Silicone Sealant

Mastic à la silicone

Sellador de silicona

Nailing-In Flange

Bride de cloutage

Reborde de clavado

Furring Strip

Tasseau

Listón de enrasar

Finished Wall Covering

Revêtement de mur fini

Revestimiento de la

pared acabada

Kohler Co. 13 1084213-2-A

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Kohler K-1108-RA-47 Guía de instalación Pagina 13