Kohler K-705810-L-ABV Guía de instalación descargar pdf (Pagina 16)

12. Install the Handle

Identify the inside handle and brackets – with non-threaded holes. Assemble the inside brackets and

handle with 2 #8 x 4-1/2″ ﬂathead screws as shown.

Place a bushing onto each screw as shown.

Position the inside handle assembly onto the door panel by carefully inserting the two screws

through the holes in the glass.

Place a second bushing onto each screw and into the glass holes.

Assemble the outside brackets and handle as shown and attach to the inside handle by

hand-tightening the screws.

NOTICE: Do not overtighten. Overtightening can cause damage to the door panel.

Using the 3/32″ hex wrench provided, tighten the screws to secure the handle in place.

Bushing

Hex Wrench

Inside Bracket

Inside Handle

Screw

Outside Handle

Outside Bracket

1144162-2-B 16 Kohler Co.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Sin comentarios

Kohler K-705810-L-ABV Guía de instalación Pagina 16