Kohler K-7219-CP Guía de instalación descargar pdf (Pagina 6)

3. Secure the Drain Elbow

CAUTION: Risk of product damage. Do not kink or cause

damage to the cable during installation.

CAUTION: Risk of property damage. Make sure a watertight

seal exists on all bath drain connections.

Apply plumbers putty to the underside of the ﬂange.

Set the ﬂange on top of the drain outlet.

Apply silicone sealant to the underside of the drain gasket, then

place the drain gasket on top of the drain elbow.

Insert the nut through the center of the ﬂange and onto the

threaded cylinder in the drain elbow.

Hand tighten the nut onto the threaded cylinder. Do not wrench

tighten at this time.

Remove any excess putty around the ﬂange.

4. Secure the Overﬂow Elbow

Align the overﬂow elbow to the outside of the overﬂow outlet.

Insert the nut through the recessed side of the backplate.

Insert the nut with backplate onto the threaded cylinder of the

overﬂow elbow.

Apply

plumbers

putty.

Drain

Gasket

Nut

Flange

Drain

Outlet

Threaded

Cylinder

Drain Elbow

Backplate

Nut

Overflow

Outlet

Overflow

Elbow

Threaded

Cylinder

1054247-2-A 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Sin comentarios

Kohler K-7219-CP Guía de instalación Pagina 6