Kohler K-72218-B7-VS Guía de instalación Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
2. Connect the Hoses
CAUTION: Risk of restricted waterflow and product damage.
Supply hoses must not be taut, kinked, or twisted during
installation. If the supply hoses must be coiled, maintain an inside
diameter of 3 (78 mm).
Connect the Supplies
Assemble the outlet hose to the faucet.
Connect and tighten the supply hoses to the supply stops.
Place a bucket under the outlet hose.
Turn on the water supplies.
Flush hot and cold water into a bucket for 1 minute to remove
any debris.
Connect the Spray Hose
NOTICE: The weight must be installed onto the spray hose to act
as a pull stop and prevent kinking damage.
Slide the weight, then the clamp onto the spray hose.
Solenoid
Clamp
Weight
Outlet Hose
Ø 3" (76 mm)
Min
Supply
Hose
Kohler Co. 5 1186051-2-D
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 59 60

Comentarios a estos manuales

Sin comentarios