Kohler K-2804-P5-96 Guía de instalación descargar pdf (Pagina 4)

1007278-2-A

Kohler Co., Kohler, WI, U.S.A.

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Temporarily position the lavatory in the countertop cutout

so the “Kohler” logo is visible. The logo is on the

underside, near the drain.

Follow either of the following two methods before applying

sealant:

 Trace a pencil line on the countertop around the

entire outside edge of the lavatory; or

 Apply masking tape to the countertop around the

entire outside edge of the lavatory to aid sealant

clean-up. The masking tape should be applied

approximately 1/8” (3mm) from the lavatory edge.

Be sure the tape is applied smoothly around the

entire lavatory.

Remove the lavatory.

Drill the faucet holes.

Install the faucet to the countertop according to the

manufacturer’s instructions.

Install the drain to the lavatory according to the drain

installation instructions.

Fig. #9



  

Apply two beads of sealant to the inside of the pencil line.

Spread the sealant evenly with a putty knife.

Fig. #10

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Note the location of the “Kohler” logo. The lavatory should

be installed so the logo is visible after installation.

Carefully position the lavatory in the cutout, and press

down firmly.

Fig. #11

“Kohler” Logo

1 2 3 4 5 6 7 8 9 ... 23 24

Sin comentarios

Kohler K-2804-P5-96 Guía de instalación Pagina 4