Kohler K-705810-L-SH Guía de instalación Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
7. Install the Strike Jamb
Position the latch in the strike jamb.
Using the 5/64 hex wrench provided, secure the latch in place using two #6 x 1/2 flathead screws.
Repeat for the second latch.
Carefully slide the seal into the T-slot on the strike jamb. Do not trim the seal.
Cut a horizontal slit in the flap of the seal 1-1/2 (3.8 cm) from each end.
Insert the strike jamb into the wall jamb as shown. Temporarily secure it in place using masking
tape.
Strike Seal
Strike Jamb
T-slot
Latch
#6 x 1/2"
Flathead Screw
1-1/2"
(3.8 cm)
Strike Jamb
Strike
Seal
Slit
1144162-2-A 10 Kohler Co.
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Comentarios a estos manuales

Sin comentarios