Kohler K-98741-K1-G Guía de instalación descargar pdf (Pagina 11)

5. Install the Finished Ceiling

Build a 5″ (127 mm) typical drop sill (including ﬁnished ceiling

material) around the mounting cradle using cut/modiﬁed 2x6

lumber.

Install the water-resistant wallboard.

IMPORTANT! The rough opening (cutout) size must be within

speciﬁed limits (refer to cutout dimensions shown above). The seal

will not cover gaps greater than 1/4″ (6 mm).

IMPORTANT! The pressure balancing loop(s) must be centered

within 1/8″ (3 mm) with the pipe nipples evenly spaced from the

edges of the rough opening.

Cut out a 20-1/4″ (514 mm) to 20-1/2″ (521 mm) square at the

desired installation location.

Install the ﬁnished ceiling material (if using tile).

Double check that the ﬁnished drop sill is the proper height

relative to the cradle. The depth from the bottom of cradle to the

ﬁnished surface should be between 3-1/2″ (89 mm) and 3-3/4″

(95 mm).

20-3/8" +/– 1/8"

(518 mm +/– 3 mm)

5" (127 mm) Typical

4-7/8" (124 mm) Min

Finished

Ceiling

3-5/8" (92 mm) Typical

3-1/2" (89 mm) Min

2x4

Ceiling Joist

2x6

Cut/Modified

Ceiling

Joist

2x4

Finished

Ceiling

Cutout

Nipple

Pressure

Balancing

Loop

Cutout

20-3/8"

+/– 1/8"

(518 mm

+/– 3 mm)

Kohler Co. 11 1207716-2-C

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Comentarios a estos manuales

Sin comentarios

Kohler K-98741-K1-G Guía de instalación Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para No Kohler K-98741-K1-G